Expert Sleepers Silent Way v1.7.3 - Manual (Page 32)

Pitch
The Pitch output derives from the current MIDI note that is sounding (or the pitch over-
ride signal - see below).
Gate
The gate output takes one of two levels, depending on whether a MIDI note is currently
active or not. You would typically route this to the gate input of a hardware envelope gen-
erator.
Env 1/2/3
The envelope signals are generated by the internal multi-stage envelope generators. There
are three independent envelopes. See below for more details.
Trigger
The trigger signal is a very short pulse, emitted whenever a new note sounds. You might
typically route this to the retrigger input of a hardware envelope generator.
Velocity
The velocity output generates a voltage according to the velocity of the note being played.
NB you can also use the note velocity to scale the envelopes - see below.
The is one additional knob per row:
Smooth
The ‘Smooth’ control has the same effect as that in the DC plug-in (see above ).
Voltages
The Voltages section sets the actual output levels that
are generated for the Gate, Trigger and Velocity out-
puts.
Gate Clsd/Open
Sets the voltages generated for the Gate signal when
the gate is closed and open respectively.
Trig Off/On
Sets the voltages generated for the Trigger signal.