Expert Sleepers Augustus Loop v2.4.1 - Manual (Page 36)

Waveform Display
The waveform, or ‘tape’, display is shown and hidden by the small
button marked ‘Tape’ just above the Delay Time controls.
Showing the waveform display hides the entire top half of the GUI -
the Filter, Inertia, Ping-Pong and Pitch groups.
The displays shows the stereo waveform on Augustus Loop’s virtual tape - the left chan-
nel is on the top.
Five lines are overlaid on the waveforms. The red line shows the write position, at which
audio is recorded onto the tape. The four white lines show the read positions of the four
read heads; from top to bottom these are the L-L head, the L-R head, the R-L head and the
R-R head.
The ‘Moving’ button at the lower left of the waveform display allows you to toggle be-
tween two display modes. In the first, the waveform scrolls while the head position lines
remain stationary. In the second, the waveform remains stationary while the head posi-
tions scroll.