Emerson Radio DTE321 - Manual (Page 21)

20
DVD BASIC OPERATION
Slide the POWER switch to the ON
position to turn the unit on.
1
Press the DVD/CD Door OPEN button to
open the disc compartment, “OPEN” will
appear on the screen and in the display.
Insert a disc with the label side facing up on
the disc tray.
2
Close the disc compartment. After
loading, the menu screen of the DVD
should appear. Use the Navigation
(√,®,π,†) buttons 1 to select the
desired option and press the ENTER
button 2 to select it. Adjust the VOLUME
control 3 as desired.
2
1
3
3
To stop playback, press the Stop (■) button
1
; “PRESS PLAY KEY TO CONTINUE” will
appear on the TV screen. Because the unit
will remember where you stopped, simply
press the Play (®) button 2 to resume
playback where you left off (resuming
playback). If the Stop (■) button 1 is pressed
twice, the TV screen shows “(■)” and the unit
will stop completely.
1
2
4
IMPORTANT NOTES:
• “ ” will appear on the TV screen during operation if you try to access a function that is not available on
the disc.
• Some discs may take a few seconds to load.
• If a disc is inserted incorrectly, dirty, damaged, or is not present at all, “NO DISC” will appear in the display.
• Always hold the disc without touching either of its surfaces. When inserting a disc, position it with the
printed title side facing up, align it with the guides and place it in its proper position.
• It is important that you read the manual that accompanies the DVD disc as there are features that are on
this DVD player that cannot be used with certain DVDs. There are also extra features that are different for
each DVD disc, so they are not explained in this owner’s manual.
PLAYBACK OF A DVD
NOTES:
• If a MENU appears on the TV screen, press the Navigation (√,®,π,†) buttons to select the desired option/item,
then press the ENTER button. Please make sure to refer to the disc’s jacket or case for additional information.
• Resuming playback may not work on all discs.