Getting started with your new grinder – EDCO SEC-NG-1.5 User Manual
Page 7
E-SECNG-I-0714
7
301-638-3326 • edcoinc.com • [email protected]
EQUIPMENT DEVELOPMENT COMPANY
GETTING STARTED WITH YOUR NEW GRINDER
NOTE: The above illustrations are viewing the Machine from the front bottom.
NOTE the direction of rotation.
1. LOADING TOOLS:
Lean the machine back on the handle to
expose the work area and load the proper
tools for your job. Electric machines should
be unplugged.
LOADING TOOLS:
Once all tools are in the proper position re-
turn the machine to upright. Remember if
you are using tools with PCD’s on Strip-
serts they have a leading edge and must be
loaded as such. Also, remember the disc
turns in the direction of arrow decal.