Getting started with your new grinder – EDCO SEC-NG-1.5 User Manual
Page 10
E-SECNG-I-0714
10
301-638-3326 • edcoinc.com • [email protected]
EQUIPMENT DEVELOPMENT COMPANY
GETTING STARTED WITH YOUR NEW GRINDER
LEVELING:
The bubble on the machine will not neces-
sarily be centered once optimum operating
position is achieved. It will also float back
and forth during grinding. Level on your
machine may not be the same as pictured
above.
ATTACH THE SKIRT:
Spacing approximately 1/2” off surface for
best vacuum performance.
FINAL NOTE: If you are using tools that
have no directionality they should be ro-
tated occasionally for longer life and the
machine should be readjusted as needed.