EDCO 4GC-P - Manual (Page 15)

Printed in USA
TVW
©2012
Page 15
E-SEC,2EC,2GC-P,4GC-I-0512
100 Thomas Johnson Drive, Frederick, MD 21702-4600 USA
Phone (301) 663-1600 • 1-800-638-3326
Fax (301) 663-1607 • 1-800-447-3326
Website: www.contrxsystems.com
Email: [email protected]
Maintenance Schedule
Visual Inspection of
Entire Machine
Check Engine Oil*
Change Engine Oil*
(refer to Engine manual)
Clean Air Filter Element*
Grease Bearings
Inspect Drive Belts
Inspect Grinding Discs
Replace Neoprene Rings
Belt Tensioning
Clean Dust & Dirt
Off machine
Before Operation
Every 4 Hours
Daily
Every 50 Hours
of Operation As Required
X
X
X
X
X
X
X
X
* Gasoline and Propane Models only
X
X
Repairs are to be performed
by approved EDCO repair
technicians.
Read and follow all instructions
in the Engine Manufacturer’s
Owner’s manual.