EcoTech Marine Full EcoSmart - Manual (Page 13)

Setup Your VorTech Pump
13
Powering Your EcoSmart Driver
You EcoSmart Driver now has the capability to be turned off without unplugging the power supply
from your driver. When turned on, the option button can be used simultaneously with either the set
or mode buttons to perform certain configurations. To turn on or off your driver, simply just press the
power/option button. If you have a master/slave relationship setup, the power/option button allows
you to power off locally or power off the whole system, including each slave pump. To power off
just one pump, only press the power/option button. To power off the system of master/slave pumps,
press and hold the power/option. Note: If you power off a system of master/slave pumps together,
you can power them all back on by pressing the option/power button on any of the pumps in that
master/slave relationship. This is useful if you have an EcoTech Marine Battery Backup, so that you
can power off your VorTech Pump without having to unplug your driver from the Battery Backup.
Section 3.5
VorTech Battery Backup
In an aquarium with no flow, fish and corals begin to die in
as little as 4 to 10 hours. The VorTech Battery Backup is
reef tank insurance in an aluminum housing. By adding the
VorTech Battery Backup, your tank is insulated from power
interruptions for up to 36 hours with the MP40w and up to 72
hours with the MP10 and MP10w.
Simply plug in the battery backup into an outlet with the
power supply and connect the battery backup to your
EcoSmart pump and your protected.
Product Features
Backup power for 30 or more hours on a VorTech Pump.
Can connect to another Battery Backup for two times the run time.
Comes with trickle charger so you’re always prepared.
Complete package comes with all the wiring cables needed.
Specifications
18 Amp-Hour 12 Volt sealed battery.
Powder-coated white aluminum housing.
Dimensions (L x W x H): 9” x 7” x 3.25” (228mm x 177mm x 82.5mm)