Ecler WPmSCREEN User Manual
Page 7
7
5.1. “Connect to…” Menu
This menu allows you to set the UCP server the unit will connect to as a client. The UCP server
may be a computer, another WPmSCREEN or even the same WPmSCREEN. In any case, the UCP
server shall host an EclerNet Manager project that includes a series of UCPs which can be remotely
managed by any UCP client.
It is possible to directly enter the IP address of the server device, using the touch keyboard
displayed on the screen, or to select a device from a list of automatically detected devices, which is
accessed by clicking on the button with the list icon to the right of the "Connect" button: