Ecler WPmSCREEN - Manual (Page 4)

4
1. IMPORTANT NOTE
We appreciate your confidence in choosing our remote control panel WPmSCREEN. In order to
obtain the best performance and efficiency it's VERY IMPORTANT to carefully read and follow all
considerations specified in this manual before connecting the product.
In order to guarantee the optimum operation of this unit, we strongly recommend that its
maintenance be carried out by our Authorised Technical Services.
1.1. Safety Precautions
Do not expose the unit to rain or water splashes, and do not place liquid containers or
incandescent objects like candles on top of the unit.
Should any connection / disconnection task be done, always disconnect the unit from the mains
supply.
There are no user serviceable parts inside the unit.
The front panel should not be cleaned with dissolvent or abrasive substances because silk-
printing could be damaged. To clean it, use a soft cloth slightly wet with water and neutral liquid soap;
dry it with a clean cloth. Be careful that water never gets into the unit through the holes of the front panel.
2. INTRODUCTION
The WPmSCREEN is a device of the EclerNet family that can be programmed to control one or
more networked EclerNet devices; you can even control a installation combining a multitude of different
EclerNet devices: MIMO88 digital matrices, NXA-series digital audio managers, NZA-series multi-channel
amplifiers, NPA-series stereo amplifiers, etc.
The WPmSCREEN is suitable for wall mount installation (surface-mounted, flush-mounted or on a
standard VESA 75 bracket).
It features a 7" touch screen displaying the graphic User Control Panels (UCPs) that have been
programmed in the EclerNet Manager application software; this screen is the interface between the user
and the associated network of EclerNet devices
.
3. INSTALLATION AND CONNECTIONS
The WPmSCREEN is suitable for surface and flush wall mount applications (using optional SIMON
510201103-039 flush-mount box or equivalent) and fits on a VESA 75 standard bracket. The packaging
includes 4 screws for installation on a VESA 75 bracket and 6 screws for installation in a flush-mount box
(SIMON 510201103-039 or equivalent, not supplied).
If the installation is directly performed on a work surface, wood, etc., 4 bolts with a maximum
diameter of 4 mm (5/32") should be used (not supplied).
The WPmSCREEN has 2 connectors:
 DC Power: round jack for connection to the universal power supply provided with the product
 Ethernet Port: RJ45 jack of the unit's network interface. It can be directly connected (point to point)
to a single EclerNet device, for its direct and exclusive control, or to an Ethernet port of the network
the rest of the EclerNet devices of the installation are connected to. The connecting cable can be a
standard or crossover CAT5 cable