DVIGear DVI-3551a - Manual (Page 10)

-8-
that power has been applied to the unit. Press the Power button to turn the
unit OFF / ON again as needed. In the event of a power outage, this unit will
automatically power ON and restore the last used settings as soon as power is
reapplied to the unit.
Note: Proper operation of this product depends on the use of the high quality cables.
DVIGear’s Super High Resolution (SHR™) cables provide low loss, low jitter, high bandwidth
signal handling and are recommended for use with this product.
5 .0 oPeraTInG THe UnIT
The DVI-3551a Convert/Scaler can be operated from either the front panel
controls, or via the included Infrared Remote Control unit.
Since Infrared is the control method used by the majority of users, please take
the time to familiarize yourself with the location and function of the various
control buttons on the Controller.
Note: Please use the OSD menu for resolutions not directly accessible from the IR remote.
Toggle through
the Inputs
Select PC Input
Select HDMI Input
Select OSD Menu
Navigate Menus
and Adjustments
Select Auto-Adjust
Function
Select YPbPr
Input
Select Output
Resolution
Exit Menu
Reset to Factory
Default Settings
Power On/Off
INPUT POWER
HDMI/DVI HD PC
VGA SVGA XGA
SXGA UXGA 1080i
1080p 720p 480p
EXIT MENU
RESET
AUTO
ADJUST
CR-27*A
OK