DVIGear DVI-TPS-RX95-HDMI User Manual
Dvi-tps-tx95-hdmi dvi-tps-rx95-hdmi, Hdmi tps extender quick start guide, Introduction
DVI-TPS-TX95-HDMI
DVI-TPS-RX95-HDMI
HDMI TPS Extender
Quick Start Guide
Introduction
DVIGear’s
DVI-TPS-TX95-HDMI and DVI-TPS-RX95-HDMI comprise a high performance HDBaseT™
twisted pair extension system designed for a wide range of professional HDMI signal distribution
applications. They support both HDMI and DVI signal formats with or without HDCP encryption and can
reliably transmit signals over a single CAT-X cable with lengths up to 600 ft. (~180 meters). In addition
to HDMI and DVI signals, these products also support bidirectional RS-232 and IR, as well as Ethernet
pass-through over the same CAT-X cable.
These extenders can stand alone or serve as end points for DVIGear’s
MXP Series Digital Matrix
Routing Switchers to form a fully-integrated AV system. The MXP Series offers an unprecedented
range of cross-platform routing capabilities, enabling I/O configurations from 9x9 up to 80x80. System
designers can choose from a wide range of sixty (60) types of I/O cards. DVIGear’s family of TPS I/O
cards are fully compatible with the TPS 95 Series Extenders. These extenders can be powered locally,
remotely point-to-point, or remotely through the switcher. When remote powering is disabled, all the
DVIGear TPS devices are HDBaseT compliant and can be used with third-party products.
TPS CAT-X
Power Cable
DVIGear SHR™ Cable
IR Connection
Ethernet
RS-232
TPS CAT-X connection
up to 600 ft. (~180m)
HD Projector
DVI-TPS-RX95-HDMI
(remote powered)
IR Receiver
HDMI cable
HDMI cable
Blu-Ray or DVD Player
Ethernet switch
DVI-TPS-TX95-HDMI
Touch panel
IR Transmitter
12V DC
Power Adapter
Internet
Typical Application
DVI-TPS-TX95-HDMI and DVI-TPS-RX95-HDMI HDMI TPS Extenders
1