Defibtech DDU-120 Series - Manual (Page 25)

17
DAC-530E-EN-BH
4 Using the DDU-120 AED
This chapter describes how to use the DDU-120 AED. The DDU-120 AED was designed for simple
operation, allowing the operator to focus on the patient. It has only one user control: the ON/OFF
button. It also has four light emitting diode (LED) indicators. Concise and easily understandable
voice messages and prompts guide the operator through the use of the unit.
The following sections describe in detail how to use the DDU-120 AED. The basic steps for use
are:
• Turn the DDU-120 AED ON by pressing the ON/OFF button.
• Connect pads to AED if not yet connected.
• Place pads on patient (follow instructions on pad package).
• Follow voice prompts.
• Stand clear of the patient if instructed by the AED.
Note: the DDU-120 AED will automatically deliver a shock if one is required. DO NOT touch
the patient during charging and while the shock-required indicator is flashing.
4.1 Overview
Active Status
Indicator Pad
Connector
ON/OFF
Button
Indicator
LEDs
Speaker
Shock Required
Indicator
check pads
do not touch patient
analyzing
auto