D.A.S. Audio DSP-48 - Manual (Page 23)

5.1 Adding the lock
Four lock types:
1:Modify The parameters can be viewed but not
change. Mute is active.
2:Modify&View The parameters cannot be viewed or
changed. Mute is active.
3:Modify&Mute The parameters can be viewed. Changes
and Mute are inactive.
4:Everything Everything is locked.
Use PARAMETER to choose lock types.
Press SAVE/ENTER button to access the password
set page.
Password
four characters. Characters flash point
to the position. Use [PREV] and [NEXT] button to change
the character position and use PARAMETER to change
the letter .Press SAVE/ENTER button to finish the operation
of lock, show as LOCKING SYSTEM .
Lock Type
1:Modify
MAIN MENU:.*....
SECURITY
MAIN MENU:.*....
SECURITY
Set Password
[_ ]
LOCKING SYSTEM
Enter Password
[_ ]
5.2 Unlocking
To enter Security menu after adding the lock. It will indicate to enter password.
PASSWORD ERROR , indicating error password.
Password four characters. Characters flash point to the position. Use [PREV] and [NEXT] button to
change the character position and use PARAMETER to change the letter .Press SAVE/ENTER button to
finish the operation of entering password. If the password is correct, it show as
UNLOCKING SYSTEM .
If the password is wrong, it shows as
UNLOCKING SYSTEM PASSWORD ERROR
Press SAVE/E NTER key to
enter security sub-menu.
P ress SAV E/ENTER to
enter security sub-menu.
Characters flash point to the positon, Press PREV and NEXT key to change the
positon of characters, use PARAMETER to choose the letter, Press SAVE/ENTER
to finish the operation of entering password.
Use PARAMETER to set
type type, press SAVE/ENTER
key to set.
Use PAR AMETER to change
character, press PR EV or NEXT
key to change letter position, press
SAVE/ENTER key to set password.
P assword correct Password error
OPERATION
5. Security Menu
22