D.A.S. Audio DSP-26 - Manual (Page 44)

40
+ +
+
+
+
+ +
+ +
A 12dB/ Octave low shelving type has been chosen and there are currently 26 spare DSP filters still
channels.
The frequency of the EQ is adjustable from 15Hz to 16kHz in approximately 1/6 Octave steps. The
screen below shows that this is the first EQ on Output 2 ( labeled as 'High'). It has a frequency of 1kHz.
If using a Low Shelving filter this would be the 3dB point.
Selectable gain from -15dB to +15dB in 0.5dB steps. Setting an EQ cut/boost to 0dB effectively
de-assigns the filter, allows it to be assigned to another channel.
Width is only available for Bell type EQs 0.05 to 3.00 Octaves in 0.05 Octave steps.
EQ Frequency
EQ Cut/Boost
EQ Bandwidth
OUT 2 HIGH *
EQ1 FQ4 14KHZ
OUT 2 HIGH *
EQ1 + - 6.5DB
OUT 6 BAND 6 *
EQ1 WD2.200 OCT
1 2 3 4 5
(1) POWER SUPPLY JACK: 90~250VOLTS, 50/60HZ
(2) RS232 CONNECTOR
(3) MIDI OUT/MIDI IN/MIDI THRU
(4) OUTPUTS: OUTPUT 1~6
(5) INPUTS: INPUT 1~2
REAR PANEL
OPERATION
Manual del usuario/ User´s manual DSP-26