D.A.S. Audio DSP-26 - Manual (Page 25)

¡
¡
¡
¡
¡
¡
¡
¡
¡
¡
¡
¡
Active crossover filters with up to 48dB/Octave slops to divide the audio spectrum into separate
passbands for each transducer. Up to six Output can be derived from either of the two inputs or a
sum of both.
Up to thirty eight bands of parametric or shelving equalization for smoothing system frequency
response over the entire bandwidth.
60 storage locations for user Programs .
Up to 630 ms signal delay per signal path ( in 21 s steps) on Inputs and Outputs for delay towers
and clusters as well as transducer alignment.
Output limiters, with adjustable thresholds and automatic attack and release settings based on
crossover frequency, protect speakers from overload damage whilst retaining full musical dynamics.
Front panel controls for channel muting, programming and level information.
Security Lock Out modes for protecting and hiding Program setting.
Delay units representable in milliseconds, meters, feet, and frames per second.
Polarity reversal on each Output.
Digital gain adjustment from -15 to 15dB.
MIDI system exclusive ( sysex) dump capabilities to save and transfer programs between units
and to archive settings.
Wide mains switch : 90~250V 50/60Hz
FEATURES
0
I
21 Manual del usuario/ User´s manual DSP-26