Operation – D.A.S. Audio DSP-26 User Manual
Page 43
39
The High edge filter frequency can be selected from Bessel 12, 24dB/Octave or Butterworh 6,12,18,
24 or 48dB/Octave or Linkwitz-Riley 12,24 and 48dB/Octave.
The options are displayed as:
BUT 6, BUT 12, BES 12, L-R 12, BUT 18, BUT24, BES24, L-R 24, BUT48, L-R 48.
This control adjusts the cut off frequency of the selected High Frequency crossover. The range is from
15Hz to 16kHz in approximately 1/6 Octave steps with 'Out' beyond 16kHz.
Multiple EQs can be assigned to individual Input and Output channels.
If there is no EQ on the currently selected channel( and there are filters available), the
button
will step into an unused Bell EQ with 1kHz frequency, 0dB cut/boost and width of 0.3. Further EQs
can only be assigned to a channel after this EQ is used first by applying some degree of cut or boost,
pressing the
button then steps into a new EQ.
The EQ parameters are in the order: EQ type, EQ frequency, EQ Cut/Boost amplitude and then EQ
Width ( for Bell type filters only).
This screen below shows that is the first EQ on Outputs 1 & 3 ( labeled as 'Low') and that it is assigned
in stereo, denoted by the S, which also indicates that two EQs are in use (across the two channels).
Note: If the low edge filter frequency is raised beyond 16kHz, the channel output will be switched
off. This is different to muting the Output channel in that any signal assigned to this output will
not indicate on the Output meters.
High edge filter type
High edge filter frequency
12.Assignable EQ
EQ type
PREV
PREV
OUT 5 & 6
HIGH *
LO SHAPE
L-R 24
OUT 5 & 6
HIGH *
LO SHAPE
L-R 24
OUT 5 & 6
HIGH *
LO SHAPE
L-R 24
OUT 5 & 6
HIGH *
LO SHAPE
L-R 24
OUT 5 & 6
HIGH *
LO SHAPE
L-R 24
OUT 5 & 6
HIGH *
LO SHAPE
L-R 24
OUT 5 & 6
HIGH *
LO SHAPE
L-R 24
OUT 5 & 6
HIGH *
HIGH SHAPE L-R 48
OUT 5 & 6
HIGH *
LO FREQ
8.00KHZ
OUT 5 & 6
HIGH *
LO SHAPE
L-R 24
OUT 5 & 6
HIGH *
LO SHAPE
L-R 24
OUT 5 & 6
HIGH *
LO SHAPE
L-R 24
OUT 5 & 6
HIGH *
LO SHAPE
L-R 24
OUT 5 & 6
HIGH *
LO SHAPE
L-R 24
OUT 5 & 6
HIGH *
LO SHAPE
L-R 24
OUT 5 & 6
HIGH *
LO SHAPE
L-R 24
OUT 5 & 6
FLAT*
HI FREQ
OUT
OUT 5 & 6
HIGH *
LO SHAPE
L-R 24
OUT 5 & 6
HIGH *
LO SHAPE
L-R 24
OUT 5 & 6
HIGH *
LO SHAPE
L-R 24
OUT 5 & 6
HIGH *
LO SHAPE
L-R 24
OUT 5 & 6
HIGH *
LO SHAPE
L-R 24
OUT 5 & 6
HIGH *
LO SHAPE
L-R 24
OUT 5 & 6
HIGH *
LO SHAPE
L-R 24
OUT 1 & 3
LOW *
EQ1 LO12
SP26
OPERATION
Manual del usuario/ User´s manual
DSP-26