Crosman BM15LE - Manual

BUSHMASTER
ModEl BM15lE
AiRSofT GUn
6MM PlASTic BB
oWnER’S MAnUAl
Distributed by
Crosman Corporation
7629 Routes 5 & 20
Bloomfield, NY 14469
www.crosman.com
1-800-724-7486 BM15LEA515
This product contains a chemical known to the
state of California to cause cancer and birth defects (and other repro-
ductive harms).
WARNING:
This is not a toy. Adult supervision is required.
Misuse may cause serious injury, especially to the eye. Eye protection
designed for airsoft guns must be worn by the user and any person
in range. May be dangerous up to 100 yds. Read the owner’s manual
before using.
WARNING:
Do not brandish or display this airsoft gun in public
– it may confuse people and may be a crime. Police and others may
think it is a firearm. Do not change the coloration and markings to make
it look more like a firearm. That is dangerous and may be a crime. READ
ALL INSTRUCTIONS AND WARNINGS IN THIS MANUAL BEFORE US-
ING THIS AIRSOFT GUN.
WARNING:
BUYER AND USER HAVE THE DUTY TO OBEY ALL LAWS ABOUT THE USE AND OWNERSHIP OF THIS
AIRSOFT GUN.
Recommend 18 years or older to purchase. Intended for use by those 16 or older.
Please read this owner’s manual completely. And remember, this airsoft gun is not a toy. Treat it with the
same respect you would a firearm. Always carefully follow the safety instructions found in this owner’s
manual and keep this manual in a safe place for future use.For questions regarding this airsoft gun,
contact Crosman at 1-800-724-7486, 585-657-6161 or www.crosman.com.
noTE : Charge the battery 6-7 hours prior to initial use. This airsoft gun will not operate properly without a
fully charged battery. DO NOT OVERCHARGE THE BATTERY. UNPLUG THE BATTERY CHARGER WHEN NOT
IN USE.
1. lEARninG THE PARTS of THE nEW AiRSofT GUn
Learning the parts of the airsoft gun will help in understanding the owner’s manual. (Fig.1)
A. Muzzle B. Rail interface c. Hop-Up compartment (ejection port cover) Other Side of Gun
d. Magazine release button E. Magazine f. Trigger G. Trigger Guard H. Grip
i. Stock Release lever J. Retractable Stock K. Charging Handle (ejection port cover release)
l. Flip up Rear Sight M. Safety (see Fig. 2) n. Accessory Rail o. Flip Up Front Sight
2. oPERATinG THE SAfETY
A. To PUT THE AiRSofT GUn “on SAfE”
• Locate the safety on the left side of the airsoft gun.
• Turn the safety lever to “SAFE” for “ON SAFE. (Fig. 2A). The safety is not “ON SAFE” unless it is pointing
to “SAFE”.
• Keep the airsoft gun in the “ON SAFE” position until you are actually ready to shoot.
Like all mechanical devices, an airsoft gun safety can fail. Even when the safety is “ON SAFE”, you should
continue to handle the airsoft gun safely. NEVER point the Airsoft gun at any person. NEVER point the
airsoft gun at anything you do not intend to shoot.
B. To TAKE THE AiRSofT GUn “off SAfE”
noTE : This airsoft gun fires in semi or full auto-mode. Full auto means it will continue to fire plastic BBs
as long as you hold the trigger. Semi- auto means you will have to pull the trigger each time you want to
fire a shot.
• Locate the safety on the left side of the receiver. (Fig. 2a)
• Turn the lever to “SEMI” for semi-auto mode. (Fig. 2b)
• Turn the lever to “AUTO” for full auto mode. (Fig. 2c)
• The airsoft gun is “OFF SAFE” and ready to fire when pointing to either “semi” or “auto.”
3. cHARGinG, loAdinG And REMoVinG THE BATTERY
A. cHARGinG THE BATTERY
• Use only the battery and charger provided with the product.
• Plug the connector on the battery into the connector on the battery charger.
• Plug the charger in to a standard 110v outlet.
noTE: The battery charging time is 6-7 hours before initial use. To prolong battery life and maintain
the best shooting performance stop using the gun for 5-10 minutes after firing about 500 rounds. For
optimum performance completely use up the battery before recharging. DO NOT CHARGE THE BATTERY
LONGER THAN THE RECOMMENDED 6-7 HOURS. UNPLUG THE BATTERY CHARGER WHEN NOT IN USE.
fiG 3
B. loAdinG THE BATTERY (fiG 3)
• The battery is an 8 cell pack, 2 packs of 3 cells and 1 pack of 2 cells connected by wires.
• Make sure the airsoft gun is “ON SAFE” (section 2A) and is UNLOADED.
• Point the airsoft gun in a SAFE DIRECTION.
• Push the pin located at the front of the rail interface completely out.
• Slide off the rail interface.
• Connect the battery pack to the gun
• Insert the battery 3 pack strings into each of the bottom battery compartments,-tucking the wire con-
necting the sections into the area between the compartments.
• Insert the 2 pack of battery string into one of the top battery compartments.
• Tuck the remaining wire, socket, and fuse into the remaining area.
• Line the rail interface with the gun, so the pin hole is at the top.
• Slide the rail interface back on.
• Replace the pin.
c. REMoVinG THE BATTERY
• Make sure the airsoft gun is “ON SAFE” (section 2A) and is UNLOADED.
• Point the airsoft gun in a SAFE DIRECTION.
• Push the pin located at the front of the rail interface completely out.
• Slide off the rail interface.
• Disconnect the battery string from the gun.
• Remove the batteries from the compartments.
• Line the rail interface with the gun, so the pin hole is at the top.
• Slide the rail interface back on.
• Replace the pin.
4. loAdinG And UnloAdinG PlASTic BBS
A. loAdinG PlASTic BBS
• Make sure the airsoft gun is “ON SAFE” (see Step 2A) and pointed in a SAFE DIRECTION.
• Use 6 mm plastic BBs only in this airsoft gun. Use of any other ammunition can cause injury to you or
damage to the airsoft gun. We recommend using crosman .20g or .25 Heavy BBs.
• While supporting the BB magazine, push the magazine release button and remove the magazine.
• Slide open magazine cap.
• Insert 6 mm plastic BBs.
• Close the magazine cap.
• Insert the loaded magazine back into the airsoft gun.
• Rotate the wind up wheel to draw plastic BBs up into the ready tube. Wind the wheel up to 75 turns for
optimum performance. Should be done while in the gun and in a vertical position.
B. UnloAdinG PlASTic BBS
• Make sure the airsoft gun is “ON SAFE” (see Step 2A) and pointed in a SAFE DIRECTION.
• While supporting the BB magazine, push the magazine release button and remove the magazine
• Release the BBs in the ready tube, by pointing the clip down in a safe direction and pushing the BB
retainer button. noTE: BBs will release rapidly.
• Do not put the magazine back in the gun.
• Point the airsoft gun in a SAFE DIRECTION.
• After reading section 6, on aiming and firing safely, take the gun “OFF SAFE “and pull the trigger.
• Repeat these steps until you are no longer firing plastic BBs.
• Put the airsoft gun back “ON SAFE“.
Even though you go through the unloading proce-
dure, continue to treat the airsoft gun as though it were loaded. Do not
point at anything you do not intend to shoot.
WARNING:
5. SElEcTinG THE fiRinG ModE
noTE: This airsoft gun fires in semi or full auto-mode. Full auto means it continues to fire plastic BBs as
long as you hold the trigger. Semi- auto means you will have to pull the trigger to fire a shot.
• Locate the safety on the left side of the receiver. (Fig. 2a)
• Turn the lever so it is pointing to “SEMI” for semi-auto mode.
• Turn the lever so it is pointing to “AUTO” for full auto mode.
• The airsoft gun is “OFF SAFE” and ready to fire when pointing to either “semi” or “auto.”
6. USinG THE HoP-UP ModE
The airsoft gun is manufactured with an adjustable hop-up system. The purpose of this system is to
change the spin on the BB as it leaves the muzzle, letting you adapt the shot for distances. To adjust the
hop-up
• Open the ejection port cover, by pulling the charging handle (part K).
• Turn the hop-up adjustment dial downward for more spin, and turn the dial upward for less spin. (FIG. 4)
fiG 4
7. AdJUSTinG THE STocK
• The airsoft gun is shipped with the stock in the closed position and is capable of adjusting to lengths.
• Before adjusting the stock make sure the airsoft gun is “ON SAFE”, (see section 2A) and pointed in a
SAFE DIRECTION.
• Push the stock release lever and adjust the stock until it locks into a position.
8. AiMinG And fiRinG SAfElY
A. BEfoRE fiRinG
• You and others with you should always wear eye protection to protect your eyes.
• Always point the airsoft gun in a SAFE DIRECTION.
• Do not shoot at hard surfaces or at the surface of water. The plastic BBs may bounce off or ricochet and
hit someone or something you had not intended to hit.
• DO NOT re-use plastic BBs because they could possibly cause damage to the airsoft gun.
• This airsoft gun is designed for target shooting and is suited for both indoor and outdoor use. Always
remember to place the target carefully.
• THINK about what you will hit if you miss the target.
• The airsoft gun is aimed when the front sight blade is position exactly in the notch of the rear sight.
The top of the front sight blade should be even with the top of the notch in the rear sight. The bulls-eye
should appear to rest on the top of the front sight .
B. USinG THE SiGHTS
• Flip the sights up for use. Flip down for storage.
• The airsoft gun is aimed when the front sight blade is positioned exactly in the center of the peep of the
rear sight. The bulls-eye should appear to rest on the top of the front sight.
• When you are sure of the target and backstop, and the area around the target is clear, take the airsoft
gun “OFF SAFE” (section 2A) and pull the trigger to fire.
c. fiRinG
• Make sure the airsoft gun is “ON SAFE” (see Step 2A) and pointed in a SAFE DIRECTION.
• Turn the lever to “SEMI” for semi-auto mode. (Fig. 2b)
• Turn the lever to “AUTO” for full auto mode. (Fig. 2c)
• When you are sure of the target and backstop, and the area around the target is clear, take the airsoft
gun “OFF SAFE” (section 2A) aim and pull the trigger to fire. The airsoft gun is “OFF SAFE” and ready to
fire when pointing to either “semi” or “auto.”
9. MAinTAininG THE AiRSofT GUn
• DO NOT MODIFY OR ALTER THIS AIRSOFT GUN. Attempts to modify the airsoft gun in any way inconsis-
tent with this manual may make the airsoft gun unsafe to use, cause serious injury, especially to the eye
and will void the warranty.
• If you drop the airsoft gun, visually check to see that there is no damage before using it again. Test fire
to see if anything seems changed, like a shorter or weaker trigger pull, this may mean broken parts. Call
Crosman customer service for assistance before using the airsoft gun again.
A. REPlAcinG THE fUSE
• Make sure the airsoft gun is “ON SAFE” (section 2A) and is UNLOADED.
• Point the airsoft gun in a SAFE DIRECTION.
• Push the pin located at the front of the rail interface completely out.
• Slide off the rail interface.
• Disconnect the battery string from the gun
• Remove the fuse and replace with a new fuse.
• Replace the rail interface and pin.
B. TRoUBlE SHooTinG/ incREASinG YoUR SHooTinG EnJoYMEnT
• Occasionally shake the gun to ensure smooth BB feeding.
• This is a high precision airsoft rifle. Prevent dust and dirt from getting into the magazine to help maintain
the performance of the airsoft rifle.
• If the efficiency of BB feeding seems to decrease, remove all the BBs from the magazine and spray
silicone oil for 1–2 seconds. (Note that the hop-up operation may become unstable for a while after
using silicone oil).
• An odor may be generated from the motor initially from a new airsoft gun, this is normal.
• If the airsoft gun does not fire in semi-auto mode, follow safe shooting rules and turn the gun to full auto
mode for 5–10 shots before returning to semi-auto mode.
• Change the battery if firing cycle becomes slow.
• Stop using the airsoft gun for 5–10 minutes after about 500 BBs have been fired.
c. clEARinG A JAM
• Never look down the end of barrel to see if a jam has been cleared.
• Make sure the airsoft gun is “ON SAFE” and pointed in a SAFE DIRECTION.
• Remove the magazine.
• Insert the tapered end of the cleaning rod into the muzzle, with the angle toward the breech (where the
magazine connects).
• CAREFULLY and slowly apply more pressure until you push the BB out of the breech.
• Insert the magazine and test gun.
10. REViEWinG SAfETY
• Do not ever point the airsoft gun at any person. Do not ever point the airsoft gun at anything you do not
intend to shoot.
• Always treat the airsoft gun as though it is loaded and as you would a firearm.
• Always aim in a SAFE DIRECTION. Always keep the muzzle of the airsoft gun pointed in A SAFE DIRECTION.
• Always keep the airsoft gun “ON SAFE” until you are ready to shoot in a SAFE DIRECTION.
• Always check to see if the airsoft gun is “ON SAFE” and unloaded when getting it from another person or
from storage.
• Always keep your finger off the trigger and out of the trigger guard until ready to shoot.
• You and others with you should always wear eye protection to protect your eyes.
• Always wear eye protection over your regular glasses.
• Use 6 mm plastic BBs only.
• Do not reuse plastic BBs because they could cause possible damage to the airsoft gun.
• Do not shoot at hard surfaces or at the surface of water. The plastic BBs may bounce off or ricochet and
hit someone or something you had not intended to hit.
• Replace the backstop if it becomes worn. Place the backstop in a location that will be safe should the
backstop fail.
• The backstop should be checked for wear before and after each use. All backstops are subject to wear
and will eventually fail. Replace the backstop if the surface is worn or damaged or if a ricochet occurs.
• Do not attempt to disassemble or tamper with the airsoft gun.
• DO NOT MODIFY OR ALTER THE AIRSOFTGUN. Attempts to modify the airsoft gun in any way may make
the airsoft gun unsafe to use, cause serious injury or death and will void the warranty.
• Using unauthorized repair centers or modifying the function of the airsoft gun in any way may be unsafe
and will void the warranty.
• Do not put the airsoft gun away loaded. Make sure ALL of the plastic BBs are unloaded from the airsoft gun.
• Always store this airsoft gun in a safe and secure location.
Specifications
Mechanism/Action Electronic Velocity Up to 330 fps with .20g BBs
caliber/Ammunition 6mm Plastic BBs Battery 8.4V battery / 1200 MAH
Magazine Up to 300 6 mm BBs fuse 30A Mini Blade
Safety Lever Sights Flip Up Front and Rear
PERfoRMAncE: Many factors can affect velocity, including brand of projectile, type of projectile and
barrel condition.
do noT RETURn THiS PRodUcT To THE SToRE.
Our friendly customer service representatives will be glad to help. You can get answers to frequently
asked questions at www.crosman.com or you can contact us directly at 1-800-7AIRGUN (1-800-724-
7486)
cUSToMER SERVicE
If this airsoft gun is not functioning, we recommend that you call Crosman Corporation Customer service
at 1-800-724-7486 or 585-657-6161. (International customers should contact their distributor.) DO NOT
ATTEMPT TO DISASSEMBLE IT! If you take it apart you probably will not be able to reassemble it correctly.
Crosman assumes no warranty responsibility under such circumstances.
For optimum performance use Crosman ® ammunition only. Using other than Crosman branded ammunition
may cause this product to malfunction and may void the warranty.
liMiTEd 90 dAY WARRAnTY
This product is warranted to the retail consumer for 90 days from date of retail purchase against defects in
material and workmanship and is transferable.
WHAT iS coVEREd
Replacement parts and labor. Transportation charges to consumer for repaired product.
WHAT iS noT coVEREd
Transportation charges to Crosman for product. Damages caused by abuse, modification or failure to
perform normal maintenance. Any other expense. CONSEQUENTIAL DAMAGES, INCIDENTAL DAMAGES,
OR INCIDENTAL EXPENSES, INCLUDING DAMAGE TO PROPERTY. SOME STATES DO NOT ALLOW THE
EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION
OR EXCLUSION MAY NOT APPLY TO YOU.
WARRAnTY clAiMS
USA customers: Attach your name, address, description of problem, phone number and copy of sales
receipt to product. Package and return to Crosman Corporation, Routes 5 & 20, Bloomfield, NY 14469.
canadian customers: Contact the Gravel Agency 418-682-3000 X46
international customers: Please return product to the nearest distributor. If you do not know the
distributor, please call 585-657-6161 and ask for our International Department for assistance.
iMPliEd WARRAnTiES
ANY IMPLIED WARRANTIES, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
FOR A PARTICULAR PURPOSE, ARE LIMITED IN DURATION TO 30 DAYS FROM DATE OF RETAIL PUR-
CHASE. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO
THE ABOVE LIMITATIONS MAY NOT APPLY TO YOU.
To the extent any provision of this warranty is prohibited by federal, state, or municipal law which cannot
be preempted, it shall not be applicable. This warranty gives you specific legal rights, and you may also
have other rights which vary from state to state.
CROSMAN is a registered trademark of Crosman Corporation in the United States.