Casio PRIVIA PX330ES1A - Manual (Page 16)

E-14
Using Built-in Tones
1.
Press the  (METRONOME) button.
This will start the metronome.
2.
Press the  (METRONOME) button again to
stop the metronome.
Changing the Beats Per Measure
You can specify from two to six beats per measure for
the metronome. After you do, a chime will sound at the
beginning of each measure. Specifying 0 for this setting
will sound a straight beat, without a chime. This setting
lets you practice with a steady beat.
1.
Hold down the  (METRONOME) button
until the number of beats per measure screen
shown below appears on the display.
2.
Use the  (w, q) buttons to select the
beats per measure value you want.
3.
Press the  (METRONOME) button to exit
the number of beats per measure screen.
Changing the Tempo Setting
There are two different methods you can use to change
the tempo setting: by pressing q (faster) and w
(slower) buttons or by tapping a beat with a button.
■ To adjust the tempo using q and w
buttons
1.
Use the  (TEMPO w, q) buttons to
adjust the tempo setting.
Each press of a button increases or decreases the beats
per minute value by one.
•
Holding down either button changes the value at
high speed.
• You can specify a tempo value in the range of 20 to
255.
■ To adjust the tempo by tapping a beat
1.
While holding down the  (FUNCTION)
button, tap the q  (TEMPO) button four
times in time with the beat you want to
specify.
• The tempo setting will change in accordance with the
timing of your tapping.
• After you use this method to specify the approximate
tempo, you can then use the procedure under “To
adjust the tempo using q and w buttons” to adjust
the setting to a more exact value.
Using the Metronome
Lights with the first beat
of each measure
Lights with each subsequent beat of
each measure
Tempo value
Tap four times