Cabletron Systems SEHI-22/24 - Manual (Page 80)

Security
6-16 Enabling Security and Traps
1. In the Repeater Security window, click to selected the desired repeater
interface, or channel, in the scroll list.
2. Click ; the Channel A Port Security window, Figure 6-7 , will
appear.
Figure 6-7. Channel A Port Security Window
3. Use the Set Security For field or the mouse to select the port or ports for
which you wish to configure security (note that the settings in the Set
Security For field will change automatically as you click to select or de-select
ports).
4. In the Security Mode field, click mouse button 1 on the appropriate selection
to apply Full or Continuous lock status to the selected port(s), or to Unlock
selected ports. (Note that if your DEVICE does not support the newest
security enhancements, or if the group of ports you have selected includes
one on a non-
LANVIEW SECURE hub, the Continuous selection will be
unavailable.)
NOTE
For information on configuring security level, violation response, and secure addresses,
see
Configuring Security , page 6-6 For information on resetting learned addresses, see
Resetting Learned Addresses , page 6-10 .