Comtrol WanderLink User Manual
Wanderlink, And rocketport, Installing the server side

Use this document as a guide to installing a system with WanderLink and the RocketPort serial
I/O
controller. The following figure illustrates the configuration.
Installing the Server Side
Use the following procedure to install the server side of the WanderLink and RocketPort installation.
Perform this procedure from the workstation.
Note: If NetWare Connect is resident on your server, then use the Removing NetWare Connect
discussion in the Novell NetWare Connect Administration Guide.
1.
Install the WanderLink server software using the WanderLink Administration Guide.
2.
Install the RocketPort controller using the RocketPort Series Asynchronous I/O Device Driver
(6528) for the Novell NetWare Operating System Installation Reference Card or the Hardware
Reference Card that came with the controller.
3.
Copy the
AIORCKT.NLM
file to the server.
4.
Update the
AUTOEXEC.NCF
file to include
WLSTART
.
5.
Use the RocketPort documentation (6528D) as a reference to add the following statement to the
top of the
WLSTART
file:
load
AIORCKT
port=
IOADDR
{node=
NNN
} {name=sss} {nports=
PP
} {fastbaud}
6.
Start the WanderLink server using the WanderLink documentation.
Installing the WanderLink PC Client Side
Use the following procedure to install the server side.
1.
Install the WanderLink
PC
client software using the WanderLink Client Pack Guide. Make sure
that you select from the range that includes from
COM1
to
COM4
for the
COM
port number during
the modem setup in the WanderLink Client screen.
2.
Test the client by using the
FUNKDIAL
test in the WanderLink client screen under Connection
Technical Support
If you have any of the following problems, you should contact WanderLink Technical Support:
•
Installing WanderLink (server or client)
•
Establishing contact with Funk Software, Inc. using the
FUNKDIAL
test.
Information for contacting Funk Software, Inc. is available in the WanderLink Administration Guide.
If you are having problems with configuring the RocketPort controller, contact Comtrol Corporation:
•
email: [email protected]
•
FAX
: (612) 631-8117
•
Phone: (612) 631-7654
•
BBS
: (612) 631-8310 (for device driver updates or technical support)
•
FTP
Site: ftp://ftp.comtrol.com
Note: The
BBS
supports modem speeds up to 28.8 Kbps with 8 bits, and no parity.
First Edition, January 9, 1996 Copyright ©1996. Comtrol Corporation. All Rights Reserved.
Comtrol Corporation makes no representations or warranties with regard to the contents of this
document or to the suitability of the Comtrol RocketPort controllers for any particular purpose.
Comtrol is a trademark of Comtrol Corporation. RocketPort is a registered trademark of Comtrol
Corporation.
WanderLink is a trademark of Funk Software, Inc. Novell and NetWare are registered trademarks of
Novell, Inc.
RocketPort
Serial Card
Novell
®
Server
WanderLink
Server
NetWare
®
Workstation
Phone Line
WanderLink
PC
Client
COM1
to
COM4
WanderLink and RocketPort Configuration
WanderLink
™
and RocketPort
®
Series Installation Notes
Document Outline
- 1. Install the WanderLink server software using th...
- 2. Install the RocketPort controller using the Roc...
- 3. Copy the AIORCKT.NLM file to the server.
- 4. Update the AUTOEXEC.NCF file to include WLSTART...
- 5. Use the RocketPort documentation (6528D) as a r...
- 6. Start the WanderLink server using the WanderLin...
- 1. Install the WanderLink PC client software using...
- 2. Test the client by using the FUNKDIAL test in t...
- WanderLink™ and RocketPort® Series Installation No...