Using your clear stick atlas, Connecting & disconnecting from clear 4g internet – CLEAR Stick Atlas User Manual
Page 5
Connecting & Disconnecting from CLEAR 4G Internet
Using Your CLEAR Stick Atlas
•
To connect to CLEAR 4G Internet, plug the CLEAR Stick Atlas into the standard USB port of your computer
or other device
•
To disconnect, remove the CLEAR Stick Atlas from the USB port
•
You can connect and disconnect while leaving the CLEAR Stick Atlas plugged into your computer’s USB port
by going to the administrative area and selecting the “Connect/Disconnect” button located in the upper
left corner
•
When using the CLEAR Stick Atlas you can quickly check the signal strength and connection status using the
LEDs located on the device
•
Signal strength LEDs: 5
Blue
LEDs = Excellent 4G signal
1
Blue
LED = Poor 4G Signal
•
Connection LED:
Green
= Connected to CLEAR 4G,
Amber
= Disconnected
5