CLEAR Spot 4G Apollo Users Guide - Manual (Page 17)

16
Manage your CLEAR Spot (continued)
CLEAR Spot Home Page / Advanced Settings / 4G Information
Use this tab to view current status of the 4G connection of your CLEAR Spot. The 4G status may be one of
the following: Not Connected, Searching, Connecting and Connected.
 Signal: Displays the actual signal strength at your current location and is composed of Received
Signal Strength Indicator (RSSI) value and Carrier-to-Interference Noise Ratio (CINR) value.
 Tower: Depends on the Tower to which the CLEAR Spot is connected.
 Frequency: Displays the center frequency of the 4G channel being used by the CLEAR Spot
device.
 RSSI Ant1: Antenna1 Strength Indicator (RSSI) value.
 RSSI Ant2: Antenna2 Strength Indicator (RSSI) value.
 CINR Ant1: Antenna1 Carrier-to-Interference Noise Ratio (CINR) value.
 CINR Ant2: Antenna2 Carrier-to-Interference Noise Ratio (CINR) value.
 Neighbor List: Displays the BSID, Preamble, Frequency, Bandwidth and NAP ID information.
If you’re using your CLEAR Spot click
here to open the CLEAR Spot Home
Page.