Chrysler 2013 200 Convertible - User Guide - Manual (Page 84)

Jacking Instructions
1. Remove the scissors jack and lug wrench
from the spare wheel as an assembly. Turn
the jack screw to the left to loosen the lug
wrench, and remove the wrench from the
jack assembly.
NOTE:
The jack handle attaches to the side of the jack with two attachment points. When the jack is
partially expanded, the tension between the two attachment points holds the jack handle in place.
2. Loosen, but do not remove, the wheel nuts
by turning them to the left one turn while
the wheel is still on the ground.
W H A T T O D O I N E M E R G E N C I E S
82