Jacking and tire changing, Jack location, Spare tire stowage – Chrysler 2013 200 Convertible - User Guide User Manual

Page 83: Preparations for jacking

JACKING AND TIRE CHANGING

Jack Location

• The jack and jack-handle are stowed under the load floor in the trunk.

Spare Tire Stowage

• The compact spare tire is stowed under the rear load floor in the trunk.

Spare Tire Removal

• Lift up the load floor cover and remove the hold down.

Preparations For Jacking

1. Park the vehicle on a firm, level surface.

Avoid ice or slippery areas.

2. Turn on the Hazard Warning flashers.

3. Set the parking brake.

4. Place the shift lever into PARK (automatic

transmission) or REVERSE (manual trans-
mission).

5. Turn OFF the ignition.

• Block both the front and rear of the wheel

diagonally opposite the jacking position. For
example, if changing the right front tire,
block the left rear wheel.

NOTE:
Passengers should not remain in the vehicle
while the vehicle is being jacked.

W H A T T O D O I N E M E R G E N C I E S