Power convertible top operation, Positioning the cargo shield for top operation, Lowering – Chrysler 2013 200 Convertible - User Guide User Manual
Page 27
POWER CONVERTIBLE TOP OPERATION
• Before lowering the top, verify the cargo shield is perfectly positioned in the trunk.
Positioning The Cargo Shield For Top Operation
• Pull the cargo shield toward you to begin unfolding the panels. Grasp the handle in the center
of the outermost (top) panel and raise the cargo shield. Then, align and set the tabs at each
end of the cargo shield in the V slots in the trunk liner as shown in the illustration.
• The power top switch will operate when the
ignition switch is turned to the ON/RUN or
ACC position and when in the power acces-
sory delay.
Lowering
• The power top switch is located on the cen-
ter console, just forward of the armrest.
• The power top switch has two top down
positions which affect window position when
lowering the top.
• Press and hold the switch halfway down to
the first detent position to lower the top and
maintain the current window positions.
• Press and hold the switch fully down to the
second detent position to lower the top and
completely lower all four windows.
O P E R A T I N G Y O U R V E H I C L E
25