beautypg.com

Instrument panel dimmer, Flash to pass, High beam operation – Chrysler 2013 200 Convertible - User Guide User Manual

Page 22: Front fog lights, Turn signals/lane change assist

background image

Instrument Panel Dimmer

• Rotate the center portion of the lever to the extreme bottom position to fully dim the

instrument panel lights and prevent the interior lights from illuminating when a door is opened.

• Rotate the center portion of the lever up to increase the brightness of the instrument panel

lights when the parking lights or headlights are on.

• Rotate the center portion of the lever upward to the next detent position to brighten the

odometer and radio controls when the parking lights or headlights are on.

• Rotate the center portion of the lever upward to the last detent to turn on the interior lighting.

Flash To Pass

• Pull the lever toward you to activate the high beams. The high beams will remain on until the

lever is released.

High Beam Operation

• Push the lever forward to activate the high beams.

NOTE:
For safe driving, turn off the high beams when oncoming traffic is present to prevent headlight
glare and as a courtesy to other motorists.

Front Fog Lights

• Turn on the parking lights or low beam headlights and pull out the end of the lever.

Turn Signals/Lane Change Assist

• Tap the lever up or down once and the turn signal (right or left) will flash three times and

automatically turn off.

O P E R A T I N G Y O U R V E H I C L E

20