Clock setting procedure, Radio general information, Radio broadcast signals – Chrysler 2008 Pacifica User Manual
Page 210

On vehicles equipped with an Analog Clock the radio
time display will function as follows:
• Radio On — Radio clock will display for approxi-
mately 5 seconds after button is pressed, then default
back to radio frequency.
• Radio Off — Radio clock will display for approxi-
mately 5 seconds after button is pressed, then default
back to blank screen.
The following radio time options can be changed by your
dealer service department:
• Radio On — Radio clock will continue to be displayed
after button is pressed.
• Radio Off — Radio clock will displayed continuously.
Clock Setting Procedure
1. Turn the ignition switch to the ON or ACC position
and press the time button. Using the tip of a ballpoint pen
or similar object, press either the hour (H) or minute (M)
buttons on the radio.
2. Press the H button to set hours or the M button to set
minutes. The time setting will increase each time you
press a button.
RADIO GENERAL INFORMATION
Radio Broadcast Signals
Your new radio will provide excellent reception under
most operating conditions. Like any system, however, car
radios have performance limitations, due to mobile op-
eration and natural phenomena, which might lead you to
believe your sound system is malfunctioning. To help
210
UNDERSTANDING YOUR INSTRUMENT PANEL