Toshiba IK527A - Manual (Page 4)

( 1. FEATURES & DESCRIPTION: ' )
This camera is a high resoiution CCD MONOCHROME video camera designed for
EiA system. With the adoption of a CCD, the camera produces an image with
reduced iag, iittie geometric distortion and has good resistance to vibration and
mechanicai shock. With those features shown below, this series is suitable for
surveillance application or as an input device for an image processing system.
(1) High resolution:
The camera can produce an image with horizontal resolution over 400 TV
lines.
(2) High sensitivity:
With minimum illumination at 0.3 lux (FI.4, 3200K) ensures this unit can
produce a good image even in very low light condition.
(3) Line-lock mode:
Based on this unique design, the image would be stable as viewed from a
video monitor controlled by a switcher, so this unit is suitable for sun/eillance
system application.
(4) Automatic electronic shutter (AES):
The unit automatically adjusts shutter speed according to the subject bright­
ness so that the amount of exposure is steady.
( 2. CAUTIONS: )
(1 ) In order to protect the camera, avoid placing or using it under direct sunlight, rain or
dust. (Indoor use only.)
(2) Don’t touch the CCD sensor directly with your fingers. If necessary, use soft cloth
moistened with alcohol to wipe off the dust.
(3) When the camera is not in use, keep the lens or cap being attached to protect the
CCD sensor.
(4) Connect AC 24V UL listed class 2 for power supply.
(5) Don’t drop your camera or give it a strong shock or vibration, or it will incur malfunc­
tion.
(6) Keep clean the video out connector and AC 24V input terminals.
(7) When using the camera on a tripod, fasten the tripod attachment base to the camera
using three of tapped holes and secure the tripod with the fastening attached three
screws.