9 setting up centralized management, Setting up centralized management, Setting up centralized – Cisco 4400G User Manual
Page 22
22
Step 5
To confirm your selections and to implement them until
you change them or until you restart your DMP,
click Apply.
Step 6
To test if your selections are suitable ones for your
DMP display, click Show IP in the DMP Mode area.
Your DMP display should show a Cisco logo and
should show the IP address for your DMP.
Step 7
To make your configuration changes permanent, even
after you restart your DMP, do the following:
a.
Select Administration > Save Configuration.
b.
On the Save Configuration page, click Save.
9
Setting Up Centralized Management
If your DMP will be managed centrally as part of a digital
signage network, you must configure DMPDM and DMM-DSM
to work together.