Cisco 4300G User Manual
Important concepts, Package contents, Connect to dhcp server
Americas Headquarters
Cisco Systems, Inc.
170 West Tasman Drive
San Jose, CA 95134-1706
USA
http://www.cisco.com
Tel:
408 526-4000
800 553-NETS (6387)
Fax: 408 527-0883
Cisco, Cisco Systems, and the Cisco Systems logo are registered trademarks or trademarks of Cisco
Systems, Inc. and/or its affiliates in the United States and certain other countries. All other trademarks
mentioned in this document or Website are the property of their respective owners. The use of the word
partner does not imply a partnership relationship between Cisco and any other company. (0610R)
© 2007 Cisco Systems, Inc. All rights reserved.
DOC-7818031=
78-18031-01
Q
UICK
S
TART
Quick Start Guide for Cisco
Digital Media Player 4300G
Contains Macromedia
®
Flash™ technology by Adobe Systems, Inc. Copyright
1995-2003 Adobe Systems, Inc. All Rights reserved. Macromedia, Flash,
Macromedia Flash, and Macromedia Flash Lite are trademarks or registered
trademarks of Adobe Systems, Inc. in the United States and other countries.
1
Important Concepts
Cisco Digital Media Player 4300G (DMP) is a
compact, addressable network appliance that
delivers digital signage content to a display that
you attach. The display can be analog or digital
and can be standard-definition or high-definition.
DMP is one part of the Cisco Digital Media System
(DMS), which combines many Cisco products.
Note
The physical location where you set up a
DMP must be within 6 feet of a 120V AC
electrical outlet (socket) and within 6 feet
of the DMP display.
Cisco Digital Media Player Device Manager
(DMPDM) is a web-based graphical user interface
to configure one DMP device during its initial
setup or to manage one DMP device in isolation.
DMPDM is served from the DMP that it manages.
A DMP display is any analog or digital television
screen or other kind of monitor that is attached
directly to a DMP and that shows digital signage
content to an audience.
Other important concepts
Cisco Application and Content Networking
System (ACNS) interoperates with DMM-DS to
greatly reduce redundant digital media traffic over
satellite and terrestrial networks. ACNS offers a
comprehensive set of streaming media features to
deliver high-quality and long-playing digital videos
live and simultaneously to thousands of users and
DMPs, or on demand at a later time.
Cisco Digital Media Manager Administration
Interface (DMM-Admin) is a web-based graphical
user interface to install or upgrade the software
licenses that enable you to use DMM-DS.
DMM-Admin is served from a Cisco Media
Convergence Server.
Cisco Digital Media Manager for Digital Signage
(DMM-DS) is a web-based graphical user interface;
it is the scalable alternative to DMPDM. DMM-DS
helps you to centrally manage a network of DMPs,
develop digital signage content for them, organize
the content, develop playlists, and much more.
DMM-DS is served from a Cisco Media
Convergence Server.
Digital signage consists of any combination of
messages or other kinds of information that people
can see or hear, and that a DMP delivers to people.
The content might relate to commerce, popular
entertainment, staff training, emergency
awareness, combinations of those things, or nearly
anything. The people who manage a DMP (or who
manage multiple DMPs in a digital signage
network) decide what to show or say, and when,
and to whom.
To learn more about DMS products and features,
go to
.
2
Package Contents
The product package for one DMP 4300G device
should contain all of the following:
•
This quick start guide and other printed
product documentation.
•
The DMP 4300G.
•
Two video cables (HDMI & composite/RCA).
•
One AC adapter and four plugs.
If anything is missing from the package or appears
to be defective, contact the technical support team
trained to support DMS products at:
.
3
Connect to DHCP Server
The factory default for a DMP 4300G is to obtain
its IP address automatically from a DHCP server.
If you will deploy your DMP at a physical location
that does not have a DHCP server, see Appliance
Administration Guide for Cisco Digital Media
System 4.0 on Cisco.com to learn how to configure
your DMP to use a static IP address.
Tip
If a network security policy restricts
DHCP address assignments to network
interface cards with known MAC
addresses, read the sticker that is affixed
to the bottom of your DMP chassis, then
provide your security policy administrator
with the MAC address.
Step 1
Plug one end of an ordinary Ethernet cable
into the Ethernet 10/100 port on the back
of the DMP chassis.
Step 2
Plug the other end of the Ethernet cable
into a network hub, network switch, or
router that participates in a DHCP
network.
4
Connect to DMP Display
You can use an analog or a digital display, but must
use the provided composite/RCA cable. (You must
always use the composite/RCA cable for audio,
even if you later use HDMI for video.)
Step 1
On the back of the DMP chassis: (a) plug
the yellow jack into the CVBS connector;
(b) plug the red jack into the
AUDIO/RIGHT connector; and (c) plug
the white jack into the AUDIO/LEFT
connector.
Step 2
Connect the other end of the
composite/RCA cable to your
DMP display.
Step 3
If the DMP display is not already turned
on, turn it on now.