RCA VPT 385 - Manual (Page 29)

Alternate Remote Control Units
Selected models of RCA color TV receivers and
monitor/receivers feature infrared hand units that will
also remotely control your VCR. Only the buttons that
are used for controlling your VCR are described here.
These buttons have generally the same functions as the
ones with the same names on the front panel of the
VCR, but there are some differences,
• Any VCR tuner channel may be selected by pressing
two of the Digit buttons on the hand unit. Press 0 first
to select tuner channels 1 through 9.
Separate buttons turn the VCR on and off.
Simply press the Record button to record. It is not
necessary to press the Play button at the same time.
Note: When you use CHANNEL UP or DOWN on the
Digital Command Center hand unit, the VCR uses its
internal scan list of channels, not the scan list that you
programmed into the hand unit for controlling the TV.
PrMt this button to turn on VCR and
put remote In "VCR Mode”. Other
buttons on remote will not control the
VCR until this button Is pressed.
Press to record.
Press to play forward
Press to rewind
when VCR is stopped
or reverse scan when in Play.
Press for fast forward
when VCR is stopped
or forward scan when in Play.
Same as “SLOW" on the VCR's
hand unit.
Press to search backward
when VCR is playing.
Same as VCR's remote.
Press to search forward
when VCR is playing.
D igital command centeg RCil
H I
[*«»»«| I I TAn I [
CD
j
WtOOWAM I--------
pi;: m
:Pt ip;;;[*]■
S . t IIIS. [S
□ BSBoiiri □ ® n
Two buttons select any channel.
Same as "Stop" on front panel.
Same as "Pause” on front panel.
Same as "F. ADV" on the VCR's
hand unit.
Select next higher or lower
channel In VCR's scan list.
Turns power off.
Press to switch antenna between
TV and VCR. {Same as
TV/VCR Switch on VCR)
Same as SLOW TRACKING AT on hand unit.
Press this button to turn on VCR and
put remote In “VCR Mode". Other
buttons on remote will not control the
VCR until this button Is pressed.
Two buttons select
any channel.
Same as "Pause"
on front panel.
Press to record.
Press to search backward
when VCR is playing.
Same as VCR’s remote.
Press to rewind
when VCR is stopped.
Press to reverse search
if VCR is playing.
no/i
Turns off power.
Select next higher or lower channel
in VCR’s scan list.
Same as "Stop” on front panel.
Press to play.
Press to search forward when VCR
is playing.
Press for fast forward when VCR
is stopped. Press for forward search
when VCR is playing.
Press to switch antenna between
TV and VCR.
27