RCA CDS 1000 - Manual (Page 8)

Using AC Adapter
To power the camera from an electrical outlet,
use the supplied AC adapter. To attach the
adapter to your digital camera:
1. Open the rubber connector cover on
the camera’s side, using the flap
handle and pulling it upwards.
The supplied AC adapter will allow the
digital camera to operate without batteries
Plug the AC adapter into the proper
camera jack. Make sure the plug slides
all the way into the jack.
Plug the AC adapter into a wall outlet
making sure the prongs slide all the
way in.
Turn the camera’s power on by
depressing the power button on the back of the camera.
Important Notes!
• Be sure to use the supplied AC adapter only. Using any other AC
adapter may cause serious damage to the camera, voiding the warranty.
• When unplugging the AC Adapter from the wall socket, be sure to grasp
the plug {not the cord).
• Avoid undue bending, pulling, or twisting of the AC adapter cord.
• If the power cord gets damaged (exposed wires, disconnection, etc.), please
contact the authorized RCA reseller to purchase a new AC adapter. Use of
a damaged power cord may cause fire or electrical shock.
• Be sure to power off your camera before connecting or disconnecting
the adapter.
• The AC adapter may become warm to the touch after extended periods
of use.This is normal and is not cause for alarm.