RCA CDS 1000 - Manual (Page 18)

Selecting the TWAIN driver
From within your image-editing software, you will need to tell the
computer what driver to use to get images from your digital
camera. Select FTLE->SELECT SOURCE and choose the
TWAIN driver for the camera that was installed from the supplied
software.
Connect the camera to the computer
Now that there are images stored in the camera, you can cormect
it to the computer and “download” the data to the TWAIN driver
software.
Make sure that the proper serial cable is used to connect the
camera to the proper COM, USB, or serial port (Macintosh
Users- use the supplied Apple Desktop Bus serial port such as
that used for external modems or printers).
Launch the image-editing application once the camera is correctly
attached to the computer and the supplied software is properly
installed. Upon first launching the editing software, you should be
prompted to make a series of selections:
select “GET Pictures.” A new screen will prompt you to choose
the source of the images:
16