Toshiba SD-V290-S-TU - Manual (Page 41)

Troubleshooting (Continued)
Symptom Cause Correction
Some channels are
skipped over when
using CH/TRK (+/-) • Those channels were deleted with the
CH. ADD/DEL option.
• Use CH. ADD/DEL. to restore channels.
See “Channel Selection” on page 16.
Picture and sound of
broadcasting channel
are weak or missing. • Antenna or cables are loose. • Tighten connections or replace cable.
• Wrong TUNING BAND option is being
used.
• Try all TUNING BAND options. See
"Channel Selection” on page 16 for
details.
Camcorder image is not
shown. • Camcorder is off. • Turn camcorder on and operate
properly.
Camcorder image via
A/V input to DVD+VCR
is not shown on TV
scroon. • DVD+VCR SOURCE SELECT is not set
to LINE1 or LINE2.
. Press INPUT SELECT to select LINE
input channel (LINEI or LINE2).
Timer recording is not
possible.
• Clock in DVD+VCR is not set to correct
time.
• Set clock to correct time. See “Setting
the Clock” on page 17.
• Timer has been programmed
incorrectly.
• Reprogram Timer. See “Timer
Recording” on page 24.
• TIMER indicator does not appear after
programming timer.
• Reprogram Timer
TIMER indicator
appears after DVD+VCR
is turned off.
• DVD+VCR is in Timer Recording mode. • This is the normal indication that the
DVD+VCR is in TIMER mode.
Stereo Audio Record
and/or Playback is not
present.
• TV is not Stereo-compatible. • No action is possible.
• Broadcast program is not in stereo for­
mat.
• No action is possible.
• DVD+VCR A/V Out jacks are not con­
nected to TV A/V In jacks.
• Make A/V connections. Stereo is
available only via A/V output from
DVD+VCR.
• DVD+VCR Audio/Video Out is not
seiected for viewing at the TV.
• Select AUX or A/V source as TV input.
• DVD+VCR BROADCAST TYPE mode is
set to SAP or MONO.
• Set BROADCAST TYPE mode to
STEREO. See “Setting the VCR Setup
Menu” on page 16.
g
oc
ILI
Q.
o
Moisture Condensation
Moisture condensation can occur; In locations where moisture condensation may occur;
• When the DVD+VCR is moved from a cold place to a
warm place.
• Under extremely humid conditions.
• Keep the DVD+VCR plugged into an AC power outlet
with POWER On. This will help prevent condensation.
• When condensation has occurred, wait a few hours
for the DVD+VCR to dry before using it.
1-43