Toshiba SD-V290-S-TU - Manual (Page 14)

Connections (Continued)
Optional, Preferred TV Connections
Rear of dvd + vcr
ESNote
You can ONLY listen to DVD playback using COAXIAL
(X), OPTICAL (O) and AUDIO OUT (A2) connections.
The tuner and VCR will still be heard through the
RF.OUT (R) or DVD/VCR AUDIO OUT (At) jack. (See
page 12.)
Connecting to an amplifier equipped with two
channel analog stereo or Dolby Surround
Connect the Left and Right AUDIO OUT (or DVD/VCR
AUDIO OUT) jacks on the DVD+VCR to the audio left
and right in jacks on your amplifier, receiver, or stereo
system using the audio cables (A1, A2) supplied.
Connecting to an amplifier equipped with two
channel digital stereo (PCM) or to an AudioЛ/ideo
receiver equipped with a multi-channel decoder
(Dolby Digital™, MPEG 2, or DTS)
f Connect one of the DVD+VCR's DIGITAL AUDIO
OUT jacks (OPTICAL О or COAXIAL X) to the cor­
responding in jack on your amplifier. Use an option­
al digital (optical О or coaxial X) audio cable.
f You will need to activate the DVD+VCR’s digital
output. (See Digital Audio Output on page 20).
m
iMi l-'Si."our OUT
U*nM FT
ВМПН.
OUT
i s
L-M^-L
1
h.
ipv
MDeo
Accessory Audio/Video (A/V) Connections to
DVD+VCR
Connect the VMS IN 1 or AV INPUT jacks on the
DVD+VCR to the audio/video out jacks on your
accessory component, using the optional audio/video
cables.
Digital Multi-channel sound
A digital multi-channel connection provides the best
sound quality. For this you need a mulli-Channei
Audio/Video receiver that supports one or more of the
audio formats supported by your DVD+VCR (MPEG 2,
Dolby Digital and DTS). Check the receiver manual and
the logos on the front of the receiver.
Ж Caution:
Due to the DTS Licensing agreement, the digital output
will be in DTS digital out when DTS audio stream is
selected.
H Notes
- If the audio format of the digital output does not match
the capabilities of your receiver, the receiver will
produce a strong, distorted sound or no sound at all.
- Six Channel Digital Surround Sound via digital con­
nection can only be obtained if your receiver is
equipped with a Digital Multi-Channel decoder.
- To see the audio format of the current DVD in the on­
screen display, press AUDIO.
Accessory Component:
VCR, Camcorder,
Video Camera,
Saieitite Receiver,
Laser Disc Pfayer
Jack panel of Accessory
UHlEI 4BSF"
l-AUD^-R
VBEO I VIDEO
OR
Rear of DVD+VCR Front of DVD+VCR
1-16