Introduction, Precautions, Applicable model – Toshiba TEC B-411 SERIES User Manual
Page 5
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
EMl-33017
INTRODUCTION
Thank you for choosing the TEC Bar Code Printer B-411 Series. The B-411 has been developed for
issuing various kinds of bar codes. The B-411 adopts a state of the art thermal printer so that it
produces less noise and more clearly printed characters.
This manual contains information about the general set-up and maintenance of the B-411 printer, and
should be read carefully to obtain maximum performance from your printer. Since ample
consideration has been given to safety, there is no danger of damaging the printer by erroneous
operation.
Should you have any questions concerning the printer, please refer to this manual. Be sure to keep
this manual for future reference.
PRECAUTIONS
1. Clean the cover by wiping with a dry cloth or a cloth soaked with detergent and thoroughly wrung
out. NEVER USE THINNER OR OTHER VOLATILE SOLVENT for cleaning.
2. DO NOT POUR WATER directly on the printer.
3. When in use, avoid locations subject to vibration and direct sunlight.
4. Properly use the TEC-specified labels.
5. DO NOT STORE the labels, in locations exposed to direct sunlight, high temperature, high
humidity, dust, or gas.
APPLICABLE MODEL