Selecting a data transmission speed – Toshiba TEC B-411 SERIES User Manual
Page 15
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
EMI-330 U
7. SELECTING A DATA TRANSMISSION SPEED
In case the data transmission speed of the PC to be connected to this printer is not 9600 BPS,
change the speed by following the procedure.
1) Turn the power OFF and remove the battery. (Refer to Section 3)
2) Remove the DIP switch cover and change the DIP switches as shown below.
Dip Switch
OFF
1
2 3 4 5 6 7 8
#8 SELECT SENSOR
ON: TRANSMISSIVE SENSOR
OFF: NO SENSOR
#5 RS-232C
ON: 9600BPS
OFF: 19200BPS
WARNiNG:Do not change any other DIP switches, or a malfunction may result