Read (x) and reset (z) reports – Toshiba MA-205 User Manual
Page 23
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
READ (X) AND RESET (Z) REPORTS
The following table shows the key operation to take each report. The "X" and
"Z" reports have exactly the same print content, except that:
1. The ”X"
report allows to read the totals but not clear memories,
while
the "Z"
report allow to read the totals and at the same time
all the
resettable memories will be cleared when the report has been taken.
2. The symbol "X" is printed as the header of a "X" report, while "Z" is
printed
on a "Z" report, to indicate the type of report.
3. A reset
count is printed near the bottom of a "Z" report only.
TABLE OF OPERATIONS FOR X AND Z REPORTS
REMPORT NAME
KEY OPERATION
SAMPLE
PAGE
AUTO READ
AUTO RESET
Mode Lock: X
w . . 1 [
at
/
tl
]
Mode Lock: Z
21
GT READ
GT RESET
Mode Lock: X
] 20 [AT/TL]
Mode Lock: Z
22
NOTES: AUTO READ/RESET reports are for the daily accumulated sales data.
GT READ/RESET reports are for the accumulated sales data in a week or
a month (the reset period depends on each store).
VERIFYING THE PROGRAMMED DATA and TAX CALCULATION TEST, which are also
available in the "X” mode.
As for these operations and print samples, refer to the page 31.
- 2 0 -