6 release ci)/i vcr/dbs, Operating the vcr, 2 press vcr – JVC TH-C30 User Manual
Page 16: 3 press and hold 0/1 vcr/dbs, 4 press enter, 6 release 0/1 vcr/dbs, Release ci)/i vcr/dbs, Slide the remote control mode selector to vcr/dbs, Press vcr, Press and hold 0/1 vcr/dbs
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Operating external components with the remote control
See page 12 for button locations.
Press number buttons (1-9,0) to enter
the manufacturer's code (2 digits).
Examples:
For a GI Jerrold product:
Press 0, then 1.
For a Sony product:
Press 2, then 0.
Manufacturer
Code
EchoStar
21
GI Jerrold
01*, 02. 03,04. 05.06,07,08
Hamlin
IS, 16,17, 18
Pioneer
13, 14
RCA
19
Scientific Atlanta
09. 10
Sony
20
Zenith
11. 12
* “01” is the initial setting.
6
Release Ci)/I VCR/DBS.
If there is more than one code listed for your brand, try each
one until you enter the correct one.
■ Operation
Aim the remote control at the DBS tuner or CATV converter.
IMPORTANT
J
DBS
VCR/DBS-'
Before using the remote control to operate a
DBS tuner or CATV converter;
1 Set the remote control mode selector
to VCR/DBS,
2 Press DBS.
The following buttons are available:
0/1 VCR/DBS:
Turns DBS tuner or CATV converter on and
off
CH +/-:
Changes the channels,
1-10, 0, SIO (1 00-1): Selects the channel.
Operating the VCR
■ To setthe manufacturer's code
1
Slide the remote control mode selector
to VCR/DBS.
2
Press VCR.
3
Press and hold 0/1 VCR/DBS.
Keep the button pressed until step ,5 is finished.
4
Press ENTER.
Press number buttons (1-9,0) to enter
the manufacturer's code (2 digits).
Examples:
For a Philips VCR:
Press 0, then 9.
For an NEC VCR:
Press 2, then 5.
Manufacturer
Code
Manufacturer
Code
JVC
01*. 02, 03
Philips
09
Emerson
11,26
RCA
05. 06
Fisher
29
Samsung
24
Funai
10, 14, 15, 16
Sanyo
21,22,23
Gold Star
12
sharp
27. 28
Hitachi
04
Shintom
30
Mitsubishi
13
Sony
18. 19. 20
NEC
25
Zenith
08
Piuiasonic
07, 17
* “01” is the initial setting.
6
Release 0/1 VCR/DBS.
If there is more than one code listed for your brand, try each
one until you enter the correct one.
■ Operation
Aim the remote control at the VCR.
IMPORTANT
i 1 VCR
VCR/DBS-^
j V I :-: . 2j
Before using the remote control to operate a
VCR;
1 Set the remote control mode selector
to VCR/DBS.
2 Press VCR.
The following buttons are available:
0/1 VCR/DBS:
Turns VCR on and off.
► (play button):
Starts playback.
■ :
Stops operation.
II:
Pauses playback.
►►:
Fast forwards video tape.
:
Rewinds video tape.
REC:
Press this button together with ► (play
button) to start recording or together with
II
to pause recording.
CH
+/-:
Changes the TV channels on the VCR.
NOTE
When operating a VCR or DBS tuner/CATV converter;
The source setting of VCR or DBS remains after you have changed the
remote control mode selector to
AUDIO
or
TV.
When operating VCR
or DBS tuner/CATV converter again, it is not necessary to press
VCR
or DBS after setting the remote control mode selector.
13