Display, May be – Toshiba TEC MA-227-100 User Manual
Page 8
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
EOl-11004
5. DISPLAY
The Operator's Display (front display) is located at the top of the register just above the keyboard.
The Customer's Display
may be
used as Rear Display if it is keep in the receptacle or used as
Remote Display if it is stretched up and turned to the required direction. The display has two types
of display - - numeric display and message descriptors.
OPERATOR’S DISPLAY
PLU
DPT
RPT
AMOUNT
.
/
-
—
t
/ 1
_/
1
1
/
f t__t
/_/ /
/ L.
/
!_/
/ /_/
V V
V
V
V
V
V
V
V
V V
SHORT
SLP
ALM
REG
(-)
FS
■DtBL
ST
TL
^ TRF
CUSTOMER’S DISPLAY
NUMERIC DISPLAY
AMOUNT (8 digits)
DPT (2 digits) :
RPT (1 digit):
Displays the numeric data, such as amount, quantity, etc.
Displays the code which represents each Department key. It stays lit
when repeating the same department entry.
Displays the repeat count of the same item. The count is indicated
from the second entry on, and only the last digit will be displayed even
if the count exceeds nine.
PLU (3 digits; the DPT and RPT digits are commonly used for this purpose.):
Displays the PLU code when any PLU is entered. It goes out when
repeating the same PLU entry.
- 5 -