Audio, Its) – Toshiba SD-3109 User Manual
Page 39
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

ф))
AUDIO
____________________________ |Kh>T»om|
Dynomk Range Control Q
Karaoke Vocal
CuJ
Extended Audio Features {23
CD Attenuation
]23
Audio Out Select
Select the output sound format corresponding to your
system connection.
For details of sound recording systems, see [
33
).
Bitstream; Select when connected to an amplifier
equipped with a Dolby Digital, DTS,
MPEG1 or MPEG2 decoder. (i8>(^
The DVD video player outputs digital
audio information in the bitstream
format when you play a DVD video disc
recorded on the Dolby Digital, DTS,
MPEG1 or MPEG2 recording system.
Analog 6ch: Select when connected to a Dolby
Digital ready amplifier equipped with
S.lch audio inputs.
ITs)
This DVD video player is equipped with
a Dolby Digital decoder.
K The next screen will appear for the
detailed setting.
Analog 2ch: Select when connected to a TV, or
Dolby Pro Logic or stereo system via
the analog audio jacks. pi¥)fT8)
PCM:
Select when connected to a 2 channel
digital stereo amplifier. (T^
The DVD video player outputs sounds
in the PCM 2ch format when you play a
DVD video disc recorded on the Dolby
Digital, MPEG1 or MPEG2 recording
system.
When you select “Analog 6Ch”:
Make the following settings for the built-in S.lch
surround decoder.
|Ф»|
C(Center) Speaker
lljrq« 1
n
S(Surround| Speaker
Subwoofer
Center Chonnel Delay
Surround Channel Delay
nest Tone
Щ
9«
1
) Select an item by pressing the
A
/
T
buttons,
and press the ENTER button.
2) Make the settings (see below) by pressing the
A
/
T / ◄
/ ► buttons, and press the ENTER
button.
C.S.Speaker Size
Small: When the center speakers or surround
speakers cannot reproduce low frequency
signals below 120 Hz.
Large: When the center speakers and surround
speakers can reproduce low frequency
signals below 120 Hz.
C(Center) Speaker
Off: When center speakers are not connected.
On: When you connect center speakers.
S(Surround) Speaker
Off: When surround speakers are not connected.
On: When you connect surround speakers.
Subwoofer
Off: When a sub woofer is not connected.
On: When you connect a sub woofer.
(Continued)
c
3
о
т Ф
О
э
(Л
ф
с
*о
39