Toshiba T1S - Manual (Page 3)

Flexible I/O
The T1 Series consist of four models, TI-16, TI-28, Tl-40 and T1-4QS. All four are block slyle
controllers allowing for I/O to be economicdly matched to specific requirements.
The TI-16 and TI-28 are fixed I/O non-expardable controllers. TheT1-40 and T1-40S I/O,
however, can be expanded. The I/O can be expandable three ways:
Option Cards
Toshiba used its advanced surface mount
technology to develop an extremely compact I/O
option card, Tbe I/O option cards are approximately
1/2 the size of a credit card, TheT1-40/T1-40S can
hold two I/O option cards inserted in the end of the
controller. The following option cards are currently
avalable.
• 16 points DC input
• 16 points DC output
• 8 DC in/8 DC out combo
• 1 channel Analog output
• 1 channel Analog output
• Field network TOSLINE-FIO remote
Expansion Rack
The T1-40/T1-40S can be connected to a two/four slot
expansion rack allowing it to Utilize most T2 Series I/O modules.
The following I/O modules are available for T1-40/T1-40S.
' 16 points DC input
' 32 points DC input
' 64 points DC input
' 16 points AC input
' 8 points relay output
' 4 channels analog input
' 1 channel pulse input
^ Communication interface
• 16 points DC output
• 32 points DC output
• 64 points DC output
• 12(>oinisACoutput
• 12 points relay output
• 2 channels analog output
• 1 axis position control
Expansion Unit
A block type expansion unit Is also available.
Each expansion unit has 32 I/O points (16 inputs and
16 outputs). The T1-40/T1-4DS can be connected to
either one expansion rack or one expansion unit