Expansion racks (for mounting t2 1/0 modules), Expansion units, Bu152 – Toshiba T1S User Manual
Page 11
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Expansion Racks (for mounting T2 1/0 modules)
A 2 or 4 slot expansion rack can be connected to the T1-40/T1-40S. By connecting the expansion rack.
T2 series I/O modules can be used with the T1-40/T1-40S. Interna] 5 Vdc power is supplied irom the
T1-40/T1-40S.
Type
Description
BU152
Z modules, with 0.15 m cable
BU154
4 modules, with 0.15 m саЫа
Available T2 series I/O modules:
Type
Marne
Specifications
DI31
DC input
16 points, 12—24 VdCi'ac input, 3 mA
□132
32 poirte, 24 Vdc input, 5 mA (connector type)
□1235
64 points, 24 Vdc input, 4 mA (connector type)
IN51
AC mput
16 points. 100—120 Vac input, 7 mA
IN61
16 points, 200—^240 Vac input, 6 mA
R061
Relay output
12 points. 240 Vac/24 Vdc output, 2 A/poInt (max.)
R062
8 points (isolated), 240 Vac/24 Vdc output, 2 A/point (max.)
D031
Transistor output
16 points, S—24 Vdc output (current sink). 1 A/point (max.)
D032
D0235
DO^P
32 points. 5—24 Vdc output (current sink). 0,1 A/ptxnl (max.)
64 points, 5—24 Vdc output (Current sink), 0.1 A/poInt (max.)
16 points, 24 Vdc output (current scurce), 1 A/point (max.)
A061
Triac output
12 pointe, 100—240 Vac output, 0.5 A/point (max.)
AI21
AI31
Analog Input
4 channels, 4 to 20 mA/1 to 5 V input, 8-bit resolution
4 channels, 0 to 10 V input. 8-bit resolution
—
AI22
4 chatnels, 4 to 20 mA/1 to 5 V input, 12-bit resolution
AI32
4 chann^s, -10 to 10 V input, 12-bit resolution
A031
Analog output
2 channels, 4 to 20 mA/1 to 5 V/D to 10 V output, 8:bil resolution
A022
2 channels, 4 to 20 mA/1 to 5 V output, 12-bit resolution
À032
2 channels. -10 to 10 V output, 12-blt resolution
PI21
Pul^ Input
1 channel plus input, 5/12 V, 100 kpps (max.)
MC11
Position control
C^11 Com municalion l/F 1 port of RS-252C, free ASCII torrhat, 300 to 19200 bps, 32Q bytes (max.)
Expansion Units
A 32 point expansion unit can be connected to the Tl -40/T1-40S. A 0,5 tn cable is included with the
expansion unit. Internal 5 Vdc power Is supplied from the T1-40/T1-40S, 24 Vdc power for the output
relay coils is required from an external source (such as tfie controller).
Type
Description
T1-EDR32
16 points. 24 Vdc Input, 7 mA
16 points, relay output, 2 A/point (max.)
T1-EAR32
16 points, 100—120 Vac input, 7 mA
16 points, relay output, 2 A/point (max.)
11