RCA CRT Television - Manual (Page 8)

SETUP AND CONNECTIONS
ADVANCED CONNECTIONS
Advanced connections give you better sound and video by separating
the audio and video signals and enabling you to connect multiple
components.
This section describes the types of inputs available on the back of your
TV and suggests ways you can use them for optimum performance.
Once you have made your connections
you will need to program the TV to tune
to the correct Video iNPUT channel in
order to see and hear audio and video
from the component. You will program
this iater in the
Interactive Setup.
Back of the TV
The diagram below describes each of the back panel jacks. When
connecting AA/ cables, be sure to connect corresponding OUTPUTS and
INPUTS (Video to Video, Right Audio to Right Audio, etc.).
Input 1
r >1
Input 2
Connect any of the following components:
• VCR • Internet Access Device
• Laserdisc Player • DVD Player
• Satellite Receiver Connect any of the following components:
• VCR • Internet Access Device
• Laserdisc Player • DVD Player
• Satellite Receiver
To view the component connected to Input 1:
Use the WHO»INPUT button on the remote.
To view the component connected to Input 2:
Use the WHO»INPUT button on the remote.
\__________________________________________ J k_________________________________________ J
This optional
connection can
be used for
better video
quality picture.
Audio Outputs
Connect to an audio receiver or
amplifier for variable controlled
or fixed level stereo output.
Cable/Antenna
Takes the signal input from a cable,
cable box, or an off-air antenna. Can also
be used for basic component connections.
^ External Speaker Jacks ^
Use to connect external
speakers for surround
sound. Make sure the
Speaker Selection is set
to EXTERNAL.
S-Video
This optional
connection can
be used for
better video
quality picture.
G-LINK
Connect the G-LINK cable for
one-button recording and
channel tuning from the Guide.