Setup and connections, Tv, vcr and satellite receiver, How to view your components – RCA CRT Television User Manual
Page 10
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
SETUP AND CONNECTIONS
TV, VCR and Satellite Receiver
CABLE, CABLE BOX. OR ANTENNA
SATELLITE SIGNAL
How to View Your Components
To watch the satellite receiver in this connection,
press TV to put the remote control into TV mode,
then press WHO*iNPUT to scroli through the video
input channels until you tune to VID (or SViD) input.
To watch the VCR in this connection, press
WHO'INPUT to scroll through the video input
channels until you tune to VID2.
In the Interactive Setup you can program the TV to
automatically tune to the correct input channel
when you turn on your component.
How to View Your Components
To watch the Satellite Receiver in this connection, press
TV to put the remote control into TV mode, then press
WHO»INPUT to scroll through the video input channels
until you tune to VID1 {or SViD 1) input.
To watch the VCR in this connection press WHO»INPUT
to scroll through the video input channels until you tune
to VID2.
To watch the DVD player in this connection, press TV to
put the remote control into TV mode, then press
WHO»INPUT to scroll through the video input channels
until you tune to VID2 {or SViD 2) input.
in the Interactive Setup you can program the TV to
automatically tune to the correct input channel when
you turn on your component.
8