RCA CRT Television - Manual (Page 24)

USINCTHE REMOTE
REMOTE BUTTONS
ON»OFF When in TV mode, turns TV on and off. if in another device
mode (VCR, DVD, Satellite, etc.) and programmed, w/ill turn the device
on and off. When pressed tw/ice w/ithin two seconds, all devices that are
on will be turned off (this feature only works with most RCA, GE, or
PROSCAN products).
VCR1 Puts the remote in VCR mode and if autotuning is enabled, it will
turn on the TV and tune to the correct channel.
TV Turns on the TV and puts the remote in TV mode. Also displays
channel information.
DVD Puts the remote in DVD mode and if auto tuning is enabled, it will
turn on the TV and tune to the correct channel.
VCR2 Puts the remote in VCR2 mode and if auto tuning is enabled, it
will turn on the TV and tune to the correct channel.
LED Red light which indicates programming mode when programming
the remote. Also displays when a valid remote button is pressed.
AUX When pressed, will turn on the component you have programmed
it to control. Also turns on the TV if auto tuning is enabled and the
remote is programmed to control the TV.
SAT*CABLE Puts the remote in SAT»CABLE mode and if auto tuning is
enabled, it will turn on the TV and tune to the correct channel.
MUTE Reduces the TV's volume to its minimum level. Press again to
restore the volume.
SKIP Press once before changing channels and the TV will bring up the
PIP window and wait 30 seconds before returning you to the original
channel. Press repeatedly to add more time.
CH * or CH V Scans up or down through the current channel list. Press
once to change the channel up or down; press and hold to continue
changing channels.
VOL< or VOL> Decreases or increases the TV’s volume.
SOUND Press once to display the audio processor choice list. Point and
select to choose a different processor or press CLEAR to exit.
GO BACK Returns you to the previous channel.
guide Brings up and exits the GUIDE Plus+ system. In SAT-CABLE
mode, brings up available on-screen guides.
INFO Brings up channel information.
MOVE (Arrows) Used to point to different items in the menu system.
Also used to adjust the menu controls. Also move the PIP window when
no menus are on the screen.
OK When in the menu system, selects highlighted items or returns you
to the previous menu.
LED
22