RCA CRT Television - Manual (Page 12)

SETUP AND CONNECTIONS
STEP 4: PlUC IN THE TV
Plug the end of the power cord into the wal! outlet, matching the wide
blade of the plug with the wide slot in the outlet. Be sure to insert the
plug completely.
STEP 5: PLACE BATTERIES IN REMOTE
• Remove the battery compartment cover from the back of the
remote.
• Insert fresh batteries. Make sure that the polarities (+ and -) are
aligned correctly.
• Replace the cover.
STEP 6: TURN ON THE TV
Press TV on the remote, or press POWER on the TV itself.
Pressing the TV button not only turns on the TV, but puts the remote
into TV mode, so that the buttons on the remote will control TV
functions.
ON-SCREEN PROCRAM CUIDE
The TV is designed to bring up the GUIDE Plus+ Gold on-screen program
guide when you use the TV button on the remote to turn on the TV
{after you have set up the GUIDE Plus+ Gold system). For more
information on setting up the GUIDE PI ush - Gold system, see the next
section. Interactive Setup.
To get out of the GUIDE PI us - e
Gold System:
• Press OK to exit the GUIDE Plus+ Gold system and tune to the
highlighted channel.
• Press GUIDE to exit the GUIDE Plus+ Gold system and tune to the
channel displayed in the View window.
• Press CLEAR to exit the GUIDE Pius+ Gold system and go to the last
channel you were watching.
STEP 7: PROGRAM THE TV
Proceed to the next section. Interactive Setup. The interactive setup
routine walks you through the steps needed to fully configure the TV.
The first steps ask you to select your preferred language for the menu
system and to begin the auto channel search, which puts available cable
TV or antenna signals into the TV's memory.
Projection TV Only.
If the picture appears to have a double or
triple image or if you notice rings or halos
around objects, you may have to adjust the
color convergence. Details can be found
under the Screen menu heading in the
“Using the Menu System" section of this
manual.
10