Toshiba IK-528A - Manual (Page 3)

c
1. FEATURES & DESCRIPTION
3
This camera is a high resolution CCD MONOCHROME video camera
designed for EIA system. With the adoption of a CCD, the camera produces
an image with reduced lag, little geometric distortion and has good
resistance to vibration and mechanical shock. With those features shown
below, this series is suitable for surveillance application or as an input device
for an image processing system.
(1) High resolution :
The camera can produce an image with horizontal resolution over 400
TV lines.
(2) High sensitivity :
With minimum illumination at 0.032 lux (F1.2, 3200K) ensures this unit
can produce a good image even in very low light condition.
(3) Line-lock mode :
Based on this unique design, the image would be stable as viewed from
a video monitor controlled by a switcher, so this unit is suitable for
surveillance system application.
(4) Automatic electronic shutter (AES) :
,^3
The unit automatically adjusts shutter speed according to the subject
brightness so that the amount of exposure is steady.
(5) 4-way programmable BLC show window type. Programmable Back Light
Compensation gives Four user-selectable zone.
(6) Dynamic range boost increases Dynamic range by 40%.
(7) Easy back focus adjustment makes for easy installations.
( 2. CAUTIONS : ' )
(1) In order to protect the camera, avoid placing or using it under direct
sunlight, rain or dust. (Indoor use only.)
(2) Don't touch the CCD sensor directly with your fingers. If necessary, use
soft cloth moistened with alcohol to wipe off the dust.
(3) When the camera is not in use, keep the lens or cap being attached to
protect the CCD sensor.
(4) Connect AC 24V UL listed class 2 for power supply.
(5) Don't drop your camera or give it a strong shock or vibration, or it will
incur malfunction.
(6) Keep clean the video out connector and AC 24V input terminals.