Battery level detection – Uniden UH054A User Manual
Page 20
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Battery Level Detection
1. At Power On, the
level indicator is
always the current
f
not in Squelch
^
or Volume Adjust
Mode,
2. The battery level
indicator indicates
the current battery
voltage level.
0 3 1
03_
(Min)
Level 0
1
2
3
4
(Max)
5
*
*
*
*
A
OFF-------"M
n
K
w
■i
■i
ON
3. It level 1 is detected when [PTT] SW is
pressed, transmit mode will fail, PTT Error
Tone will sound and TX icon will blink. On
the other hand, if Level 0 is detected,
transmit mode will fail causing PTT Error
Tone to sound while TX icon remains Off.
Once the battery level dips below Level 0,
Power will be turned off automatically.
Once any of the above conditions occur, re
charge your battery immediately.
17