Selecting a channel, Transmitting – Uniden UH054A User Manual
Page 13
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Selecting a Channel
1, When you turn on
the UH-054, the last
channel will appear
on the LCD display,
(e.g. CH01)
2. To select a higher
channel, press A on
the channel button.
3. To select a lower
channel, press ▼ on
the channel button.
np
=
uc =,
n
u
To quickly change channels, press and hold A
or
T , This will change the channel rapidly.
MEM LOW ^
. ^ u
Transmitting
The UH-054 uses the 40 UHF CB Channels.
For your reference, a listing of all the available
channels is printed at the end of this manual.
1. The maximum RF transmit power of UH-
054 is 1 watt.
To switch to low
power, press the
FII/LO switch. LOW
appears on the LCD
and the transmit
power output level is
changed to 0.2
Watt.
To switch back to
high power, press
the Ftl/LO switch
again. TheTX
power returns to
high and the LOW
indicator disappears
from the LCD,
2. Before you transmit, listen for activity on the
selected channel.
10